Claims Policy
1. Purpose
This Policy sets out how UPPF reviews and resolves Claims from its Distributors and Dealers for Products believed to be defective in material or manufacture, and how approved Claims are credited.
2. Scope and Relationship to Other Documents
2.1 This Policy applies to Products purchased through UPPF’s authorized distribution channel.
2.2 This Policy governs the commercial relationship between UPPF and its Distributors and Dealers. It does not modify the UPPF Limited Warranty, extend any warranty to vehicle owners, or create rights for any third party.
2.3 This Policy is an operating guideline. It does not form part of, amend or replace any written agreement between UPPF and a Distributor or Dealer.
3. Definitions
- (a) “Claim” means a request by a Claimant for Credit for a Product alleged to have a Product Defect.
- (b) “Claimant” means the Distributor or Dealer submitting a Claim.
- (c) “Credit” means a credit memo issued to the Claimant’s account and applied toward future purchases from UPPF.
- (d) “Dealer” means a UPPF Certified Dealer.
- (e) “Distributor” means an Authorized UPPF Distributor.
- (f) “Electronic Warranty Registration” means the warranty record created in UPPF’s warranty system at the time of installation.
- (g) “Installation Date” means the date installation was completed, as recorded in the Electronic Warranty Registration.
- (h) “Product” means a UPPF film product.
- (i) “Product Defect” means a defect in material or manufacture, as determined by UPPF Quality Assurance.
- (j) “UPPF” means UPPF International Pte. Ltd.
4. Good Faith and Claim Rate Review
4.1 Good faith. UPPF administers this Policy on the basis of mutual trust and good faith. Claimants are expected to submit only Claims they reasonably believe arise from a Product Defect.
4.2 Claim rate review. UPPF monitors claim rates across its network. If a Claimant’s claim rate materially exceeds the normal range, such as more than two (2) times the network average, UPPF may subject all of that Claimant’s Claims to enhanced review. Enhanced review may include requests for physical samples and remote or on-site inspection.
5. Claim Categories
5.1 Expedited Claims
Eligibility. A Claim qualifies for expedited processing if UPPF Quality Assurance can verify a Product Defect and either:
- (a) the defect is identified upon unrolling, before the Product is used; or
- (b) the defect is not apparent upon unrolling but is clearly visible after the Product is applied to a vehicle, and the Claim is submitted within fifteen (15) days after the Installation Date.
Documentation. The Claimant must submit:
- (a) photographs or video clearly showing the defect;
- (b) the roll number; and
- (c) the dimensions (length and width) of the affected Product.
Return of Product. The Claimant is not required to return the Product. UPPF may request a physical sample for laboratory analysis, in which case UPPF will bear the shipping cost. The Claimant must retain the affected Product until the Claim is closed.
5.2 Standard Claims
Eligibility. A Claim submitted more than fifteen (15) days after the Installation Date, and within the applicable warranty period, is processed as a Standard Claim.
Documentation. The Claimant must submit:
- (a) the Electronic Warranty Registration, showing the Installation Date, vehicle identification number (VIN), installed panels and installation photographs; and
- (b) current photographs of the vehicle that clearly show the defect, the vehicle and its VIN.
The vehicle information in (a) and (b) must match.
Registration required. UPPF will deny any Standard Claim that is not supported by a valid Electronic Warranty Registration, because UPPF cannot otherwise verify the Product and model installed.
6. Exclusions
UPPF will not approve a Claim for any condition not caused by a Product Defect, including:
- (a) edge lifting caused by pressure washing or other high-pressure water;
- (b) chemical exposure or corrosion;
- (c) impact from stones, sand, gravel or other road debris;
- (d) collision, abrasion or other accidental damage;
- (e) improper installation, storage or handling;
- (f) Products not purchased through UPPF’s authorized distribution channel; and
- (g) moisture pockets, haze and other normal curing conditions during the first thirty (30) days after installation.
7. Claim Review and Determination
7.1 UPPF Quality Assurance reviews each Claim and determines, in its reasonable judgment, whether the reported condition is a Product Defect.
7.2 UPPF may request additional information, photographs, video, a physical sample, or a remote or on-site inspection. UPPF may suspend review of a Claim until it receives the requested information.
7.3 UPPF will use reasonable efforts to issue a determination within ten (10) business days after receiving a complete Claim.
8. Resolution and Credit
8.1 For each approved Claim, UPPF will issue a Credit equal to the net invoice price paid by the Claimant for the affected Product.
8.2 Credits are applied against the Claimant’s next purchase order. Credits are non-transferable, have no cash value, and will not be refunded or paid in cash.
8.3 A Credit issued under this Policy resolves the related Claim in full.
8.4 Issuing a Credit is not an admission of liability and does not set a precedent for any other Claim.
9. Disputes
9.1 A Claimant that disagrees with UPPF’s determination may request reconsideration in writing within fourteen (14) days after the determination, together with any additional evidence.
9.2 The parties will attempt in good faith to resolve any dispute through discussions between their designated representatives.
10. Policy Administration
10.1 UPPF may update this Policy at any time. Where practicable, UPPF will give thirty (30) days’ notice of material changes. Claims submitted before a change takes effect are handled under the version in effect on the date of submission.
10.2 Questions about this Policy should be directed to UPPF Quality Assurance at info@uppf-global.com.
Under the Lights at Evergreen: Conor Shanahan Turns Seattle Into a Title Race
Read moreabout Under the Lights at Evergreen: Conor Shanahan Turns Seattle Into a Title Race
PCU vs TPU PPF: What the Chemistry Tells
PCU is a polycarbonate subtype of TPU, not a new material. A technical guide to where PCU PPF helps, where it fails, and how to judge supplier claims.
Romain Dumas wins Goodwood Festival of Speed
Half a Car Length: How Rosenqvist Made the 110th Indy 500 the Closest in History
Read moreabout Half a Car Length: How Rosenqvist Made the 110th Indy 500 the Closest in History
Below Sea Level: The Jordan Rally and the Quiet Hunt for a Record 18th
Read moreabout Below Sea Level: The Jordan Rally and the Quiet Hunt for a Record 18th
The Croatia Rally Returns: A New Coastline, the Same Brutal Tarmac
Read moreabout The Croatia Rally Returns: A New Coastline, the Same Brutal Tarmac
Japan Grand Prix 2026: Antonelli's Suzuka Masterclass
On March 29, 2026, its 53-lap race delivered another chapter: 19-year-old Kimi Antonelli becoming the youngest multiple race winner and youngest championship leader in Formula 1 history.
Read moreabout Japan Grand Prix 2026: Antonelli's Suzuka Masterclass
Tokyo Auto Salon 2026 at Makuhari Messe mixed OEM concepts and grassroots creativity, with Toyota’s GR GT3 Concept taking top honors amid renewed energy for tuning, materials innovation, and high-fitment EV conversions.
Budapest–Bamako Rally 2025 celebrated its 20th anniversary with a classic route from Hungary to Gambia, unpredictable desert drama, and another win for the seasoned Koros Auto Team. Organizers balanced tradition and adaptation on Africa’s toughest amateur stage.
UPPF Opens Shanghai Technical Center
UPPF Opens Shanghai Technical Center to Accelerate Product Support, Quality Management, and Installer Training
Liwa International Festival Abu Dhabi
Liwa International Festival 2026 in Abu Dhabi’s Al Dhafra desert ran from 12 December 2025 to 3 January 2026, drawing several hundred thousand visitors for Tal Moreeb dune races, drag and drift competitions, traditional camel and horse events, and a busy Liwa Village, with class wins including standout EV and hybrid runs on the famous sand hill.
King of the Hammers 2025 delivered a landmark upset in Ultra4 off-road racing, with Kyle Chaney steering a UTV to overall victory in grueling desert and rock conditions at Johnson Valley. Full recap of winners, weather, and engineering storylines.













